TAPER-TIP ALUMINUM GAFFS

Tapered For Speed! Swaged For Power!

The slim, tapered shape of AFTCO’s Taper-Tip Aluminum Gaffs makes them lightning fast in the water — easier to maneuver and deadly accurate. They’re stronger and lighter too, so they bring fish into the boat with less flailing and confusion. The shafts are made from corrosion-resistant marine aluminum — the same material used in our famous “Unibutts ®” — and they are “swaged” for uniform strength from end to end, but with no unnecessary weight.

Taper-Tip Gaffs are now available in our traditional rich Gold and our also popular lustrous Black finishes — both anodized for lasting beauty and resistance to corrosion. All models are fitted with soft but rugged black grips molded from the same non-slip material found on the finest fishing rods. Black vinyl butt caps seal out corrosive moisture and prevent deck scarring.

Our gaff hooks are fashioned from stainless steel rods, with easy-to-sharpen triangular points. Rod diameters are 1/4, 5/16, 3/8 and 1/2-inch, and offered are hooks with 2, 3, 4 and 5-inch “throats”. Some gaffs float, unless otherwise indicated on chart below. With shafts of 3/4 and 1-inch butt diameters, Taper-Tip Gaffs are available in overall lengths of 3, 4, 5, 6, and 8 feet.

$(document).ready(function() { $(“table#blanks”).tablesorter(); });

Model Gold	Model Black	Width of Hook Throat	Hook Shaft Diameter	Length	Butt OD	Floats?
GFA243L GLD	GFA243L B	2″	1/4″	3 ft.	3/4″	Yes
GFA244L GLD	–	2″	1/4″	4 ft.	3/4″	Yes
GFA254 GLD	GFA254 B	2″	5/16″	4 ft.	1″	Yes
GFA256 GLD	GFA256 B	2″	5/16″	6 ft.	1″	Yes
GFA353 GLD	GFA353 B	3″	5/16″	3 ft.	1″	Yes
GFA354 GLD	GFA354 B	3″	5/16″	4 ft.	1″	Yes
GFA354L GLD	–	3″	5/16″	4 ft.	3/4″	Yes
GFA356 GLD	GFA356 B	3″	5/16″	6 ft.	1″	Yes
GFA364 GLD	GFA364 B	3″	3/8″	4 ft.	1″	No
GFA365 GLD	GFA365 B	3″	3/8″	5 ft.	1″	No
GFA366 GLD	GFA366 B	3″	3/8″	6 ft.	1″	No
GFA368 GLD	GFA368 B	3″	3/8″	8 ft.	1″	No
GFA464 GLD	GFA464 B	4″	3/8″	4 ft.	1″	No
GFA465 GLD	GFA465 B	4″	3/8″	5 ft.	1″	No
GFA466 GLD	GFA466 B	4″	3/8″	6 ft.	1″	No
GFA468 GLD	GFA468 B	4″	3/8″	8 ft.	1″	No
GFA586 GLD	GFA586 B	5″	1/2″	6 ft.	1″	No